Pre-Order

【Pre-Order】Mars 5 Ultra

$509.99 AUD $407.99 AUD
Shipping calculated at checkout.

  • Tilt Release Innovation, Blazing Fast
  • Stunning 9K, True-to-Life
  • Smart Mechanical Sensor, Print Worry-Free
  • AI Camera Keeps You in Total Control
  • Real-Time Monitoring & Time-Lapse Recording
  • Wi-Fi Cluster Printing, Redefining Efficiency
Pre-Order:

Estimated Shipping Time from AU Warehouse - July 31st.

Mars 5 Ultra
Mars 5
  • Lifetime Support
  • 1-Year Warranty
  • 14 Days Return
  • Free Shipping
Product information

Where We Ship

Orders placed on the ELEGOO AU website can be shipped to Australia.

The estimated delivery time for in-stock products is 3-7 workdays.

If you pre-order a product, it will be shipped according to the estimated delivery time mentioned on the product page, and after shipment, it takes 3-7 workdays for delivery.

*Please note that the ELEGOO AU website does not currently ship to New Zealand.

 

Shipping Restrictions

Unable to ship the Jupiter and Jupiter SE 3D printer to post office addresses.

You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.

 

Shipping Fees:

For orders over $70 AUD, it’s FREE SHIPPING. Orders under $70 AUD will be charged a $20 AUD shipping fee. EXCEPT for the conditions listed below:

  • For orders including Jupiter SE, some areas (Northern Territory, Queensland, Tasmania, Western Australia) will be charged shipping fees.
  • For orders including Saturn 4 or Saturn 4 Ultra will be charged $30/pc shipping fees.

    Ownership, Terms, and Risk

    Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.

    Note: Please do not enter any PO Box address for orders containing Jupiter SE, otherwise, your package can’t be dispatched by any express.

    Normally the orders that have been shipped out (you have received the tracking number or your order status has been completed) cannot be canceled. If you have to refuse delivery due to force majeure after the package is dispatched from ELEGOO, you are subject to the return and refund policies and must pay for the original shipping charges, which will be deducted from your refund.

    If you do not contact the delivery company within 5 days after the delivery attempt, they may return the goods to us. A return charge may be assigned to us which may be twice of the delivery cost. If the case of this happens, we reserve the right to ask you to pay the return charge plus an additional re-delivery cost before we re-dispatch the item to you.

    When the goods are delivered, please check that the order is complete and undamaged. If there is any damage to the goods at the point of delivery, you can contact us: info@elegoo.com

    Following a successful transaction you will be notified when your order has been dispatched with a tracking number provided, if you do not receive a tracking number within 48 hours of completing your purchase, we ask that you first check your email “Junk/Spam” folder and then contact us: info@elegoo.com

    Refund Policy & Warranty Info

    Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and warranty rules differ according to the models and parts list.

     

    Warranty Policy

    1. Warranty timeline

    Models

    Parts List

    Warranty Period

    3D Printing Related Products

    Neptune 2/2D/2S/X/3/3 Pro/3 Plus/3 Max/4/4 Pro/4 Plus/4 Max

    Main Parts of the Machine (nozzle and build plate sheet Excluded)

    12 Months

    Mars/Mars Pro/Mars C

    LCD Screen

    3 Months

    Other Main Parts of the Machine (FEP&Tools Excluded)

    12 Months

    Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 Ultra/5/5 Ultra

    Saturn/Saturn S/Saturn 2/Saturn 8K/3/3 Ultra/4/4 Ultra

    LCD Screen

    6 Months

    Other Main Parts of the Machine (FEP&Tools Excluded)

    12 Months

    Mars 4 DLP

    Main Parts of the Machine (FEP&Tools Excluded)

    12 Months

    Jupiter

    LCD Screen

    3 Months

    Other Main Parts of the Machine (FEP&Tools Excluded)

    12 Months

    Jupiter SE

    LCD Screen

    6 Months

    Other Main Parts of the Machine (FEP&Tools Excluded)

    12 Months

    Mercury
    Mercury Plus V1.0/V2.0
    Mercury X/XS Bundle

    Main Parts of the Machine (Tools Excluded)

    12 Months

    PHECDA LASER
    ENGRAVER &
    CUTTER-
    10w/20W

    Main Parts

    PCB, Motor, Laser head, Power Adapter

    12 Months

    Other Parts①

    Fans

    6 Months

    Other Parts②

    Synchronous belt, motor connection line, laser connection line

    3 Months

    Consumables and Other attached

    Power cord, USB cable, Engraving Material (filter cartridge, wood board, stainless steel sheet, leather, etc.), user manual, packaging, tools (hexagonal wrench, open-end wrench), etc.

    No warranty

    Arduino Kits, Robot Kits & Component Kits

    All

    All

    12 Months

    Pre-owned Products

    All

    All

    No warranty

    Accessories (For individual purchases)

    LCD Screen:
    Mars/Jupiter

    Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty.

    3 Months

    LCD Screen:
    Mars 2/2 Pro/3/3 Pro/4/4 Ultra/4 Max/5/5 Ultra

    Saturn /S/2/8K/3/3 Ultra//4/4 Ultra/Jupiter SE

    Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty.

    6 Months

    Air Purifier:
    Mini/USB/Mars Mate

    Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty.

    12 Months

    Mini Heater

    Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty.

    12 Months

    Build Plate

    Damage caused by scratches, drops or bumps is not covered by the warranty.

    6 Months

    Release Film:

    FEP/PFA/ACF

    Release film is a consumable product without warranty

    No warranty

    Resin Tank

    Installation tools and screws are not warranted

    6 Months

    Washing Bucket:

    Mercury Plus V1.0/ V2.0

    Mercury X/XS Bundle

    No warranty for damage caused by man / misuse (e.g. resin curing inside the bucket).

    6 Months

    3D Stainless Steel Funnel

    3D Stainless Steel Funnel is a consumable product without warranty

    No warranty

    Hotend Kit:
    Neptune 3 Pro/3 Plus/3 Max/4/4 Pro/4 Plus/4 Max

    Entire Hotend Kit

    6 Months

    Extruder Kit:
    Neptune 3 Pro/3 Plus/3 Max /4/4 Pro /4 Plus/4 Max

    Entire Extruder Kit

    6 Months

    STM 32-bit Silent Motherboard:
    Neptune 3 Pro/3 Plus/3 Max

    Motherboard

    12 Months

    PEI Magnetic Platform Kit:

    Neptune 3 Pro/3 Plus/3 Max

    PEI Magnetic Platform Kit is a consumable product without warranty

    No warranty

    Nozzle Kit:

    Neptune 3 Pro/3 Plus/3 Max/4/4 Pro/4 Plus/4 Max

    Nozzle Kit is a consumable product without warranty

    No warranty

    Cooling Fan Kit:Neptune 3 Pro/3 Plus/3 Max

    Including 4010/4015 Blower Fan and 6010 Axial Flow Fan

    6 Months

    PTFE Tube:
    Neptune 3 Pro/3 Plus/3 Max

    PTFE Tube is a consumable product without warranty

    No warranty

    Enclosure

    All

    12 Months

    Rotary Attachment:
    PHECDA Laser Engraver

    All

    12 Months

    10W/20W Air Assist:

    PHECDA Laser Engraver

    All

    12 Months

    Enclosure:

    PHECDA Laser Engraver

    All

    12 Months

    Honeycomb Panel:
    PHECDA Laser Engraver

    Honeycomb Panel is a consumable product without warranty

    No warranty

    Raisers:

    PHECDA Laser Engraver

    All

    12 Months

    Composite Filter:

    PHECDA Laser Engraver

    Composite Filter is a consumable product without warranty

    No warranty

    10W/20W Laser Module:

    PHECDA Laser Engraver

     

    All

    12 Months

    Window Mirror:

    PHECDA Laser Engraver

    Window Mirror is a consumable product without warranty

    No warranty

    20W Adapter:

    PHECDA Laser Engraver

    All

    12 Months

    2. Warranty Rules for Laser Head and Tube

    A. Laser Head WarrantyRules:
      The rate of laser power drop is related to the frequency of use, working hours, and working environment.

    B. 
    Laser Tube Warranty Rules:

    a). If the laser tube is found to be damaged during the first unpacking inspection, after-sales warranty service can be provided normally;

    b). During the warranty period, if the laser tube cannot emit light normally, but no obvious appearance defects are found, after-sales warranty services can be provided normally;

    c). During the warranty period, if the laser tube has any appearance cracks (including but not limited to cracks caused by improper handling or cracks caused by freezing temperatures), after-sales warranty services can't be provided normally.

     

    3. Warranty Forfeiture

    The following Conditions Are Not Covered Under Warranty:
    A. Products without sufficient proof of purchase
    B. Lost or stolen products
    C. Items that have expired their warranty period
    D. Non-quality-related issues (after 30 days of purchase)
    E. Free products
    F. Repairs through 3rd parties
    G. Damage from outside sources
    H. Damage from misuse of products (including, but not limited to: falls, extreme temperatures, water, and operating devices improperly)
    I. Purchases from illegitimate resourcesor second-handed parties
    J. Normal discoloration, wear, or consumption during product use.

     

    Return & Refund Policy

    1. For Unwanted Items
    *This clause does not apply to Pre-owned & Refurbished items.

    If the Elegoo product that you purchased does not meet your satisfaction but was not confirmed defective by certified Elegoo technicians, we call such product as “unwanted product”.

     

    You may return the unwanted product to Elegoo for a full refund within 14 days or replacement within 30 days of the delivery date unless otherwise specified in the products’ listing on our website, on the receipt, or packing slip. You are responsible for the shipping fees. Beyond the end of those 14 days, refunds for unwanted products are not available, and beyond 30 days, refunds and exchanges for unwanted products are not available.

     

    Unwanted Issue

     

    Items

    Responsibility of Return Shipping Charges

    Refund

    Exchange

    Within 14 Days

    Customer

    Within 30 Days

    ×

    Customer

    Within Warranty

    ×

    ×

    ×

     

    Important: To avoid any delay or denial of processing your refund and exchange request, please verify that your returning product satisfies all of our following inspection criteria.

     

    The product for refund and exchange must be:
    A. In new and unused condition (Free from damages of any type, including, but not limited to dents, scratches, cracks, abuse, and defacement);
    B. Complete with all parts & accessories included and all original tags and labels attached;

     

    For your own benefit, we recommend that you use a traceable carrier that can provide you with the delivery confirmation to ship your Product for refund back to the location instructed in the RMA authorization. Elegoo shall not be responsible for any loss or damage to the returning product caused in transit.

     

    The returning product will be thoroughly inspected by Elegoo when received and a decision will be made whether the inspection criteria are met. If your returning product fails to satisfy the inspection criteria and has been shipped to Elegoo, your non-conforming product for refund or exchange will be rejected or subject to a restocking fee of up to 15% at Elegoo’s sole discretion.

     

    After the 14-day refund/30-day exchange window has expired, your only recourse regarding the products is through our warranty.

    2. For Quality-Related Items
    *This clause does not apply to Pre-owned & Refurbished items.

     A. Product is defective when you receive it, within 14days of delivery, you can return defective items to Elegoo and get a full refund or replacement, and Elegoo is responsible for return shipping charges. Or you can ask Elegoo to repair defective items, and Elegoo is responsible for repair fees.

    B. Beyond the 14days but within warranty, a full refund and replacement are not available, but repair is acceptable. Elegoo is responsible for repair fees.

    C. Out of warranty, Elegoo will provide free technical support, if the parts need to be replaced, the customer is responsible for the repair fees, which means the customer needs to purchase the parts and bear the freight.

    Quality-Related Issue

     

    Items

    Responsibility of Fees

    Refund

    Replace

    Repair

    Return Shipping Charges

    Repair Fees

    Within 14 Days

    Elegoo

    Elegoo

    Within Warranty

    ×

    ×

    ×

    Elegoo

    Out of Warranty

    ×

    ×

    ×

    Customer

     

    Important: To avoid any delay or denial of processing your refund and replacement request, please verify that the returning product must be with all parts & accessories included and all original tags and labels attached and in the original box (generic boxes will be rejected).

    3. Process After Returning Product

    After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least 7 days from the receipt of your item to process your return. We will notify you by email when your return has been processed and move to the next warranty process, refund you the payment via Paypal, or send a new replacement to you.

     

    Contact Us

    Regarding product issues, please don't hesitate to contact us at the customer service channels below to acquire technical support, refund or exchange.

    1. For 3D printer technical support: 3dp@elegoo.com
    2. For laser engraver technical support: lec@elegoo.com
    3. For order issues, unwanted item refunds, or returns: info@elegoo.com
    4. For STEM kits, robots technical support: service@elegoo.com

    When contacting our customer service team, the buyer must provide sufficient proof of purchase (the order number from online purchases made through ELEGOO, Amazon, or other ELEGOO's authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.

    Tilt Release Innovation, Blazing Fast

    Boasting a blazing fast speed of up to 150mm/h, the Mars 5 Ultra leaves competitors in the dust. Its revolutionary tilt release technology enables swift model peeling from the release film, ensuring lightning-fast printing without compromising on detail, accuracy or reliability. Seamlessly switch between the fast and slow print modes, unlocking unmatched flexibility and efficiency.

    Stunning 9K , True-to-Life

    Featuring a 7" mono LCD with 9K ultra-high resolution and 18μm XY resolution, the Mars 5 Ultra ensures the faithful reproduction of every intricate detail with stunning fidelity and breathtaking textures. Boasting 92% light uniformity, the advanced COB light source ensures consistent results, bringing your visions to life with impeccable precision.

    Self-Check & Automatic Leveling , Plug-N-Play

    With its smart self-check and automatic leveling functions, the Mars 5 Ultra allows all skill levels to dive straight into the creative process. No more setup hassles or tedious calibrations - simply unbox, power on, and print.

    One-Click Self-Check
    With one single click, the Mars 5 Ultra will perform a quick self-check to verify whether its components are functioning properly before printing. When the accumulated usage of the release film is approaching 60,000 times, the device will issue a reminder to replace the release film promptly.
    *After replacing the release film, please click the refresh button on the device self-test page to reset the counter manually.

    One-Click Automatic Leveling
    Effortless precision is just a click away. Thanks to its intelligent mechanical sensor, the build plate can be automatically leveled with a simple click, making 3D printing accessible to users of all experience levels.

    AI Camera Acts as Your Eyes, Stay in Total Control

    Say goodbye to costly failures and wasted time as the AI camera detects errors in real-time, guiding you to flawless results. Never worry about empty build plate or model warps again - it's a thing of the past. The AI camera monitors every step, instantly alerting you to any errors for immediate resolutions.

    Print Smarter , Print Worry-Free

    With a smart mechanical sensor, the Mars 5 Ultra supports residue detection to prevent damage to the LCD screen. Plus, timely alarms for resin shortages and leveling failures minimize waste and ensure uninterrupted efficiency. Stay worry-free and enjoy high-quality prints every time.

    Real-Time Monitoring and Time-Lapse Photography

    Effortlessly monitor the printing process in real-time, troubleshoot issues, and ensure exceptional print quality. Capture stunning time-lapse videos and share your creative journey with ease.

    Advanced Overheat Protection

    No more overheating worries. Enjoy carefree printing with the advanced high temperature protection. When the LED temperature exceeds 80℃, the intelligent system triggers an alarm and halts printing automatically, ensuring enhanced safety and extended lifespan.

    Power-Loss Resume Printing

    Power Outages? No Problem. The Mars 5 Ultra will automatically resume printing from where it stops. Say goodbye to wasted materials or time. Never again will you lose the printing progress.

    User-Friendly Design

    Quick-Release Design, Easy Assembly
    The quick-release design of the build plate enables effortless removal and installation, making cleaning and maintenance a breeze.

    Replaceable Lock Screws, Resin Clog-Free
    No more resin clogs hindering your creative flow with the replaceable resin tank lock screws. Enjoy uninterrupted printing perfection every time.

    Dual Pour Spouts Resin Tank, Smooth Pouring
    Double the convenience, double the speed. The resin tank features dual pour spouts, allowing for quick and easy loading and unloading, maximizing your efficiency.

    Reliable Drip Tray, Clean and Safe
    The reliable drip tray effectively prevents your resin from spilling, maintaining a clean workspace and enhancing safety. Enjoy a seamless printing experience without any messy surprises.

    Redefine efficiency and streamline your workflow with seamless control over multiple printers from one device. Harness the power of synchronized prints to supercharge your productivity and conquer ambitious projects with ease.

    Powered by self-developed system with 8G RAM, which ensures faster computing and stable file transfer, the Mars 5 Ultra offers a smoother and more efficient printing experience.

    Experience 3D printing that's as easy as scrolling through your smartphone. The 5-inch capacitive touch screen features a simple, intuitive interface that guides you through every step, effortless even for first-timers.

    Trust the Mars 5 Ultra's robust metal frame to withstand the test of time. With meticulous engineering, it is designed to endure countless printing hours while maintaining exceptional print quality and reliability.

    The LCD screen is safeguarded by a durable 9H tempered glass protector, providing exceptional resistance to scratches and damage for a worry-free printing experience.

    Laser-engraved build plate features superior adhesion, preventing detachment and warping issues during printing, and ensuring effortless and damage-free removal of printed models.

    No longer will you be bound by generic exposure settings. Imagine having the ability to finely tune the exposure time for each section, enabling you to determine the optimal exposure time, meticulously control and enhance the printing results.

    The Elegoo Mars Mate air purifier's built-in high-density activated carbon filter can effectively absorb resin odor, with the purification efficiency up to 95% for TVOC.

    What's In Box

    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer
    Find Your Ideal 3D Printer

    Specification

    BUILD VOLUME

    153.36 x 77.76 x 165 mm³

    PRINTING SPEED

    MAX 150mm/h

    LAYER THICKNESS

    0.01-0.2mm

    XY RESOLUTION

    18x18μm (8520x4320)

    Z-AXIS ACCURACY

    0.02mm

    PRINTING TECHNOLOGY

    MSLA

    LIGHT SOURCE

    COB Light Source (wavelength 405nm)

    LCD SCREEN SIZE

    7-inch 9K Mono LCD

    LCD SCREEN PROTECTOR

    9H hardness tempered glass

    CONNECTION METHOD

    USB Interface & WiFi

    SYSTEM

    EL3D-4.0

    SLICING SOFTWARE

    Chitubox

    OPERATING SCREEN

    4.0-inch Capacitive Touch Screen

    LANGUAGE

    Chinese, English, Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish, Portuguese

    AIR PURIFIER

    USB connection unavailable, compatible with Mars Mate air purifier

    Other Functions

    Tilt Release Technology,
    One-Click Automatic Leveling,
    Self-Check & Overheat Protection,
    AI Camera (Empty Build Plate Detection, Warp Detection, Real-Time Monitoring, Time-Lapse Recording),
    Smart Mechanical Sensor (Resin Shortage Alarm, Residue Detection Alarm, Leveling Failure Alarm),
    Power-Loss Resume Printing.

    RESIN

    Supports most resins on the market (water-washable, standard, ABS-like, plant-based, etc.)

    POWER REQUIREMENTS

    100-240V 50/60Hz 24V 3A

    HEAT DISSIPATION METHOD

    3 copper heat pipes + single fan

    DIMENSIONS

    260 x 268 x 451.5 mm³

    Net Weight

    8.8kg

    Gross Weight

    10.8kg

    Show More(16+)

    FAQs

    How long does delivery take after shipping?

    1. In-stock Product: 3-7 workdays for delivery

    2. Pre-owned Product: 4-8 workdays for delivery

    3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.

    What countries do you ship to?

    Click to view available countries

    Do you offer free shipping service?

    Click to view Shipping Fees

    Can I change the delivery address of my package after it has been shipped out?

    Unfortunately, we cannot change the shipment once the product is shipped.