PRE-ORDER | Centauri

$687.99 AUD $499.99 AUD
Shipping calculated at checkout.

Pre-order Shipping Notice
  • Item: Centauri
  • Estimated Shipping Time from AU Warehouse: June 30
  • Additional Items: Some pre-order spare parts and accessories will ship between April 30 and May 30. Please refer to product pages for details.

    Click here for detailed shipping times by batch.
  • Print Right Out of the Box
  • Full-Auto Calibration
  • CoreXY with 500 mm/s Velocity
  • 20,000 mm/s² Acceleration
  • Build Volume 256 × 256 × 256 mm
  • Lifetime Support
  • 1-Year Warranty
  • 14 Days Return
Product information

Where We Ship

Orders placed on the ELEGOO AU website can be shipped to Australia. Please note that the ELEGOO AU website does not currently ship to New Zealand.

  • The estimated delivery time for in-stock products is 3-7 workdays.
  • If you pre-order a product, it will be shipped according to the estimated delivery time mentioned on the product page, and after shipment, it takes 3-7 workdays for delivery.

1. Once the package has been dispatched, please promptly monitor its status. If you encounter any of the following situations, please contact us immediately to prevent exceeding the logistics channel's tracing period: the package status remains unchanged for over 7 days, or if the package has been signed for but not received by you.
2. Upon receiving the goods, please ensure that the order is complete and undamaged. For any logistics inquiries, feel free to reach out to us without delay.

Contact Information:
A. If you have opted for Worry-Free Delivery, you will receive an email from Seel. In case of lost, stolen, or damaged products due to logistics issues, please report these concerns via the Seel email or seek assistance by contacting them.
B. If you have not chosen Worry-Free Delivery, you can contact us at info@elegoo.com. We will coordinate with the logistics company to verify the situation and assist you in filing a claim if necessary.

 

Shipping Restrictions

Unable to ship the OrangeStorm Giga and Jupiter SE 3D printer to post office addresses.

You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.

 

Shipping Fees:

For orders over $70 AUD, it’s FREE SHIPPING. Orders under $70 AUD will be charged a $20 AUD shipping fee. EXCEPT for the conditions listed below:

  • Orders including Saturn 4, Saturn 4 Ultra or Saturn 4 Ultra 16K will be charged $30 AUD/pc shipping fees.
  • Orders including Centauri Carbon or Centauri will be charged $50 AUD/pc shipping fees.

Ownership, Terms, and Risk

1. Please ensure your shipping address is accurate. Once the package is dispatched, we cannot reroute it. You are solely responsible for verifying the address. If a loss occurs due to an incorrect address or a fraudulent transaction, you will be liable for all financial losses.
Note: Please do not enter any PO Box address, otherwise your package can't be dispatched by any courier services.

2. Orders (excluding Pre-Orders) are typically forwarded to the warehouse 8 hours after placement. Once submitted to the warehouse, orders are generally non-cancellable and non-modifiable. If modifications are required, we will attempt to coordinate with the warehouse; however, success cannot be guaranteed. Costs incurred due to address errors or cancellations are subject to our Return & Refund Policy, and you will be responsible for payment.

3. Please ensure all order details are accurate and your phone is accessible. If a product is returned due to the following reasons, we reserve the right to charge return shipping fees and redelivery costs prior to resending the item:
A. Failure to contact the delivery carrier within 5 days of a delivery attempt.
B. Incorrect shipping address provided.

FAQ
Q: If I order multiple products, will they be delivered together?
A: We aim to ship items together whenever possible. However, depending on product availability or shipping requirements, items may arrive separately. You will receive a notification email for each shipment.

Refund Policy & Warranty Info

Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and warranty rules differ according to the models and parts list.

 

Warranty Policy

1. Warranty timeline

Models Parts List Warranty Period
3D Printing Related Products Neptune 3/3 Pro/3 Plus/3 Max

Neptune 4/4 Pro/4 Plus/4 Max

OrangeStorm Giga

Centauri Carbon/Centauri
PEI Platform Plate, Nozzle, Heater, Thermistor, PTFE Tube, Tools No warranty
Hot End 3 Months
Extruder Kit 6 Months
Main Parts of the Machine 12 Months
Jupiter Release Film, Tools No warranty
LCD Screen 3 Months
Resin Tank, Build Plate 6 Months
Other Main Parts of the Machine 12 Months
Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 DLP/4 Ultra/5/5 Ultra

Saturn S/Saturn 2/Saturn 8K/3/3 Ultra/4/4 Ultra/4 Ultra 16K

Jupiter SE
Release Film, Tools No warranty
LCD Screen, Resin Tank, Build Plate 6 Months
Other Main Parts of the Machine (FEP&Tools Excluded) 12 Months
Mercury 
Mercury Plus V1.0/V2.0/V3.0
Mercury X/XS Bundle
Main Parts of the Machine (Tools Excluded) 12 Months
PHECDA LASER 
ENGRAVER & 
CUTTER- 
10w/20W
Main Parts PCB, Motor, Laser head, Power Adapter 12 Months
Other Parts① Fans 6 Months
Other Parts② Synchronous belt, motor connection line, laser connection line 3 Months
Consumables and
Other attached
Power cord, USB cable, Engraving Material (filter cartridge, wood board, stainless steel sheet, leather, etc.), user manual, packaging, tools (hexagonal wrench, open-end wrench), etc. No warranty
Arduino Kits, Robot Kits & Component Kits All All 12 Months
Pre-owned Products All All No warranty
Accessories (For individual purchases) Release Film:FEP/PFA/ACF Release film is a consumable product without warranty No warranty
LCD Screen:
Mars/Jupiter
Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. 3 Months
LCD Screen:
Mars 2/2 Pro/3/3 Pro/4/4 Ultra/4 Max/5/5 Ultra
Saturn /S/2/8K/3/3 Ultra/4/4 Ultra/4 Ultra 16K
Jupiter SE
Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. 6 Months
Build Plate for LCD Printers Damage caused by scratches, drops or bumps is not covered by the warranty. 6 Months
Resin Tank Installation tools and screws are not warranted 6 Months
Air Purifier:
Mini/USB/Mars Mate
Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. 12 Months
Mini Heater Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. 12 Months
Washing Bucket: Mercury Plus V1.0/ V2.0/V3.0
Mercury X/XS Bundle
No warranty for damage caused by man / misuse (e.g. resin curing inside the bucket). 6 Months
3D Stainless Steel Funnel 3D Stainless Steel Funnel is a consumable product without warranty No warranty
3D Paint Kit All No warranty
PEI Liquid Glue All No warranty
PEI Platform Kit/PEI Magnetic Platform Kit PEI Platform Kit is a consumable product without warranty No warranty
Build Plate for Centauri Carbon/Centauri Build Plate is a consumable product without warranty No warranty
Nozzle Kit Nozzle Kit is a consumable product without warranty No warranty
PTFE Tube PTFE Tube is a consumable product without warranty No warranty
Hotend Kit Hotend Kit (Nozzle, PTFE Tube Excluded) 3 Months
Extruder Kit/Printhead Kit Entire Dual-Gear Direct Extruder Kit 6 Months
Anti-Vibration Feet All 12 Months
Cooling Fan Kit Including 4010/4015 Blower Fan and 6010 Axial Flow Fan 12 Months
STM 32-bit Silent Motherboard Motherboard 12 Months
Enclosure All 12 Months
Dual Printhead Mounting Plate All 12 Months
Four-Printhead Mounting Plate All 12 Months
5KG Large Spool Holder Kit All 12 Months
Camera All 12 Months
Filament Vacuum Storage Bags Kit The pump is guaranteed for 1 month and the vacuum bag is a consumable product without warranty. 1 Month
Rotary Attachment:
PHECDA Laser Engraver
All 12 Months
10W/20W Air Assist:PHECDA Laser Engraver All 12 Months
Enclosure:PHECDA Laser Engraver All 12 Months
Honeycomb Panel:
PHECDA Laser Engraver
Honeycomb Panel is a consumable product without warranty No warranty
Raisers:PHECDA Laser Engraver All 12 Months
Composite Filter:PHECDA Laser Engraver Composite Filter is a consumable product without warranty No warranty
10W/20W Laser Module:PHECDA Laser Engraver All 12 Months
Window Mirror:PHECDA Laser Engraver Window Mirror is a consumable product without warranty No warranty
20W Adapter:PHECDA Laser Engraver All 12 Months
Metal Business Cards All No warranty
Silicone Mat All No warranty

2. Warranty Rules for Laser Head and Tube

A. Laser Head WarrantyRules:
  The rate of laser power drop is related to the frequency of use, working hours, and working environment.

B. 
Laser Tube Warranty Rules:

a). If the laser tube is found to be damaged during the first unpacking inspection, after-sales warranty service can be provided normally;

b). During the warranty period, if the laser tube cannot emit light normally, but no obvious appearance defects are found, after-sales warranty services can be provided normally;

c). During the warranty period, if the laser tube has any appearance cracks (including but not limited to cracks caused by improper handling or cracks caused by freezing temperatures), after-sales warranty services can't be provided normally.

3. Warranty Period

All times shown on this page are calculated from the date the original order was received. If you receive free replacement products or accessories, the warranty period will still be calculated from the date the original order was received.

 

4. Warranty Forfeiture

The following Conditions Are Not Covered Under Warranty:
A. Products without sufficient proof of purchase
B. Lost or stolen products
C. Items that have expired their warranty period
D. Non-quality-related issues (after 30 days of purchase)
E. Free products
F. Repairs through 3rd parties
G. Damage from outside sources
H. Damage from misuse of products (including, but not limited to: falls, extreme temperatures, water, and operating devices improperly)
I. Purchases from illegitimate resourcesor second-handed parties
J. Normal discoloration, wear, or consumption during product use.

 

Return & Refund Policy

1. For Unwanted Items

*This clause does not apply to Pre-owned & Refurbished items.

If the Elegoo product that you purchased does not meet your satisfaction but was not confirmed defective by certified Elegoo technicians, we call such product as “unwanted product”.

 

  1. For products in condition unopened (all original tags and labels attached), within 14 days of delivery, you may return them with an "unwanted reason" and receive a refund. Once we issue the refund, it may take up to 7 days to reflect in your original payment method. The original shipping charges are non-refundable, and ELEGOO will charge a 5% restocking fee based on the order amount. The refund will be issued in the same currency in which the item was purchased, minus any taxes, import duties, and original shipping charges incurred.

  2. A. For products in condition open-box and unused, within 14 days of delivery, you may return them with an "unwanted reason" and receive a refund. Once we issue the refund, it may take up to 7 days to reflect in your original payment method. The original shipping charges are non-refundable, and ELEGOO will charge a 15% restocking fee based on the order amount. The refund will be issued in the same currency in which the item was purchased, minus any taxes, import duties, and original shipping charges incurred.

  3. For used products or orders beyond 14 days, refunds for unwanted products are not available.

 

Unwanted Issue

 

Product Status

Items

Responsibility of Both Original Shipping Charges and Return Shipping Charges

Restocking Fee

Deduction Fee

Refund

Within 14 Days

Unopened

Customer

5% based on the order amount

If the returned machine detects key parts missing, the corresponding fees will be deducted.

Open-box and unused

Customer

15% based on the order amount

Used

×

×

×

Within Warranty

All Status

×

×

×

×

 Important: After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.

For your own benefit, we recommend that you use a traceable carrier that can provide you with the delivery confirmation to ship your Product for refund back to the location instructed in the RMA authorization. Elegoo shall not be responsible for any loss or damage to the returning product caused in transit.

 

The returning product will be thoroughly inspected by Elegoo when received and a decision will be made whether the inspection criteria are met. If your returning product fails to satisfy the inspection criteria and has been shipped to Elegoo, your non-conforming product for refund will be rejected or subject to a deduction fee at Elegoo’s sole discretion.

 

After the 14-day refund window has expired, your only recourse regarding the products is through our warranty.


 

2. For Quality-Related Items
*This clause does not apply to Pre-owned & Refurbished items.

 A. Product is defective when you receive it, within 14days of delivery, you can return defective items to Elegoo and get a full refund or replacement, and Elegoo is responsible for return shipping charges. Or you can ask Elegoo to repair defective items, and Elegoo is responsible for repair fees.

B. Beyond the 14days but within warranty, a full refund and replacement are not available, but repair is acceptable. Elegoo is responsible for repair fees.

C. Out of warranty, Elegoo will provide free technical support, if the parts need to be replaced, the customer is responsible for the repair fees, which means the customer needs to purchase the parts and bear the freight.

Quality-Related Issue

 

Items

Responsibility of Fees

Refund

Replace

Repair

Return Shipping Charges

Repair Fees

Within 14 Days

Elegoo

Elegoo

Within Warranty

×

×

×

Elegoo

Out of Warranty

×

×

×

Customer

Important: 1. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.

2. To avoid any delay or denial of processing your refund and replacement request, please verify that the returning product must be with all parts & accessories included and all original tags and labels attached and in the original box (generic boxes will be rejected).

3. Process After Returning Product

After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least 7 days from the receipt of your item to process your return. We will notify you by email when your return has been processed and move to the next warranty process, refund you the payment via Paypal, or send a new replacement to you.

 

Contact Us

Regarding product issues, please don't hesitate to contact us at the customer service channels below to acquire technical support, refund or exchange.

  1. For 3D printer technical support: 3dp@elegoo.com
  2. For laser engraver technical support: lec@elegoo.com
  3. For order issues, unwanted item refunds, or returns: info@elegoo.com
  4. For STEM kits, robots technical support: service@elegoo.com

When contacting our customer service team, the buyer must provide sufficient proof of purchase (the order number from online purchases made through ELEGOO, Amazon, or other ELEGOO's authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.

Print Right Out of the Box

Centauri comes to you pre-assembled, tuned, and calibrated, so you can print right out of the box. No more tedious manual adjustment. Enjoy hassle-free auto-calibration for flawless results every time.

Built for High-Speed

Centauri redefines speed with its advanced CoreXY motion system, reaching up to 500 mm/s and 20,000 mm/s² acceleration. Its 32 mm³/s flow rate enables rapid creation of larger, intricate designs, while the high-power heated bed ensures quick heat-up for instant printing.

500

mm/s

Velocity

20,000

mm/s²

Acceleration

32

mm³/s

Flow rate

Built for High-Speed

Centauri redefines speed with its advanced CoreXY motion system, reaching up to 500 mm/s and 20,000 mm/s² acceleration. Its 32 mm³/s flow rate enables rapid creation of larger, intricate designs, while the high-power heated bed ensures quick heat-up for instant printing.

500

mm/s

Velocity

20,000

mm/s²

Acceleration

32

mm³/s

Flow rate

Integrated Die-Cast
Design

We spent extra to bring you the most reliable integrated die-cast aluminum construction, ensuring superior stability and reduced vibrations for high-speed printing. This robust design allows you to achieve faster prints without compromising accuracy or quality.

Feel the Smoothness

Achieve a perfect first layer with smooth surfaces and stunning details. Centauri's automatic vibration compensation and pressure advance ensures extra smoothness, bringing you lightning-fast speed without ringing or ghosting in prints. 

Before
After

Even More Carefree

Fan
self-check

Power Loss
Recovery

Auto Filament Unloading

Filament Run-Out Detector

Powerful and
Speedy System

Achieve outstanding performance with Centauri's advanced operation system, featuring seamless OTA upgrades, 8G ROM for ample storage, and fast dual-band Wi-Fi for reliable LAN transfers.

8G

ROM

OTA

Firmware Upgrade

Count on smooth printing with the semi-automatic belt tensioner that effortlessly maintains optimal tension, reducing vibrations and ensuring unmatched accuracy.

The upgraded dual-sided plate features a new PLA Specific Surface with excellent adhesion and minimal warping, ensuring perfect PLA printing even at lower heatbed temperatures. Explore more dual-sided plates with unique textures to make your prints stand out.

Centauri excels with advanced cooling, featuring a high-speed 5020 model fan, an efficient hotend fan, and real-time fan self-checks for optimal performance.

Enjoy effortless printing with a user-friendly 4.3-inch touch screen - it's as easy as using your smartphone. Intuitive guidance and smooth navigation make it perfect for everyone.

The heatbed nozzle wiper keeps your nozzle residue-free before each use for flawless prints every time, while the filament waste bin[1] makes post-print cleanup quick and easy.

The magnetic printhead cover makes nozzle replacements a breeze, cutting maintenance time and enhancing overall performance for seamless printing.

Select Your Ideal Option

Centauri Carbon

$649.99

Learn More

Centauri

$499.99

Current View

Body
Body
Shell
Shell
Enclosed (Metal & Glass)
Open Frame
Chassis
Chassis
Die-Cast Aluminum
Die-Cast Aluminum
Printing Specifications
Printing Specifications
Max Printing Speed
Max Printing Speed
500 mm/s
500 mm/s
Max Acceleration
Max Acceleration
20,000 mm/s²
20,000 mm/s²
Max Hotend Flow
Max Hotend Flow
32 mm³/s
32 mm³/s
Printing Accuracy
Printing Accuracy
±0.1 mm
±0.1 mm
Layer Thickness
Layer Thickness
0.1-0.4 mm (recommended 0.2 mm)
0.1-0.4 mm (recommended 0.2 mm)
Leveling Method
Leveling Method
Auto-Leveling
Auto-Leveling
Build Volume (W × D × H)
Build Volume (W × D × H)
256 × 256 × 256 mm
256 × 256 × 256 mm
Supported Filament
Supported Filament
Carbon/Glass Fiber Reinforced
Filaments/PLA/PETG/ABS/ASA/TPU/PET/PC/PA
PLA/PETG/TPU/ABS/ASA
Sensors
Sensors
Chamber Monitoring Camera
Chamber Monitoring Camera
Yes
-
Filament Run Out Sensor
Filament Run Out Sensor
Yes
Yes
Power Loss Recovery
Power Loss Recovery
Yes
Yes
Hardware
Hardware
Extruder
Extruder
Hardened Steel Dual-Gear Direct Extruder
Hardened Steel Dual-Gear Direct Extruder
Nozzle
Nozzle
0.4 mm Brass-Hardened Steel Nozzle (Included)
0.2/0.6/0.8/1.0 mm (Optional)
0.4 mm Brass-Hardened Steel Nozzle (Included)
0.2/0.6/0.8/1.0 mm (Optional)
Hot End
Hot End
All-Metal
All-Metal
Max Hot End Temperature
Max Hot End Temperature
320 °C
320 °C
Build Plate
Build Plate
PLA Specific & Textured PEI Dual-Sided Plate
PLA Specific & Textured PEI Dual-Sided Plate
Max Heated Bed Temperature
Max Heated Bed Temperature
110 °C
100 °C
Filament Cutter
Filament Cutter
Yes
Yes
Touch Screen
Touch Screen
4.3-inch Capacitive Touch Screen
4.3-inch Capacitive Touch Screen
Cooling & Filtration
Cooling & Filtration
Fan
Fan
Part Cooling Fan
Hot End Fan
Auxiliary Part Cooling Fan
Chamber Temperature Regulator Fan
Part Cooling Fan
Hot End Fan
Air Filter
Air Filter
Activated Carbon Filter
-
System
System
Connectivity
Connectivity
USB & Wi-Fi
USB & Wi-Fi
OTA Firmware Upgrade
OTA Firmware Upgrade
Yes
Yes
Language
Language
English, French, German, Russian, Italian, Spanish, Japanese, Chinese
English, French, German, Russian, Italian, Spanish, Japanese, Chinese
Slicing Software
Slicing Software
ELEGOO Slicer (Recommended), Orca, Cura
ELEGOO Slicer (Recommended), Orca, Cura
Input Format
Input Format
STL, OBJ, 3MF, STP
STL, OBJ, 3MF, STP
Output Format
Output Format
Gcode
Gcode
Size & Weight
Size & Weight
Printer Dimensions
Printer Dimensions
398 × 404 × 490 mm
398 × 404 × 490 mm
Net Weight
Net Weight
17.5 kg
14 kg
Gross Weight
Gross Weight
21 kg
17 kg
Power Requirements
Power Requirements
Input Voltage
Input Voltage
100-240 VAC, 50/60 Hz
100-240 VAC, 50/60 Hz
Max Power
Max Power
1100W@220V, 350W@110V
1100W@220V, 350W@110V

What's in Box

Notice:
1. Customers are required to print the filament waste bin themselves as it is not included in the packaging. The model for printing will be available on the provided USB drive or within the machine.

FAQs

How long does delivery take after shipping?

1. In-stock Product: 3-7 workdays for delivery

2. Pre-owned Product: 4-8 workdays for delivery

3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.

What countries do you ship to?

Click to view available countries

Do you offer free shipping service?

Click to view shipping Fees.

Can I change the delivery address of my package after it has been shipped out?

Unfortunately, we cannot change the shipment once the product is shipped.