![](http://au.elegoo.com/cdn/shop/files/1_a24fb847-a425-4498-a558-23d768458dc6_20x_crop_center.jpg?v=1719212856)
![](http://au.elegoo.com/cdn/shop/files/3_9fc6dbf7-41eb-416f-b20b-3f6453bc937a_20x_crop_center.jpg?v=1719212857)
![](http://au.elegoo.com/cdn/shop/files/4_741be58f-a8e1-4563-9502-623f9e7f972b_20x_crop_center.jpg?v=1719212856)
![](http://au.elegoo.com/cdn/shop/files/5_20x_crop_center.jpg?v=1719212856)
![](http://au.elegoo.com/cdn/shop/files/6_20x_crop_center.jpg?v=1719212856)
![](http://au.elegoo.com/cdn/shop/files/7_dd65be38-4754-4936-a11f-880fdb673620_20x_crop_center.jpg?v=1719212856)
![](http://au.elegoo.com/cdn/shop/files/8_698c45ab-5bbe-434f-baee-e632a89fbc88_20x_crop_center.jpg?v=1719212857)
![](http://au.elegoo.com/cdn/shop/files/9_20x_crop_center.jpg?v=1719212856)
![](http://au.elegoo.com/cdn/shop/files/2_988883c3-b4df-4e39-967b-2476ba480e33_20x_crop_center.jpg?v=1719212857)
Mars 5
- Automatic Leveling
- Smart Mechanical Sensor
- One-Click Self-Check
- Advanced Overheat Protection
- 6.6-Inch 4K Mono LCD
- COB Light Source
Estimated Shipping Time from AU Warehouse - Ready to ship.
Where We Ship
Orders placed on the ELEGOO AU website can be shipped to Australia.
The estimated delivery time for in-stock products is 3-7 workdays.
If you pre-order a product, it will be shipped according to the estimated delivery time mentioned on the product page, and after shipment, it takes 3-7 workdays for delivery.
*Please note that the ELEGOO AU website does not currently ship to New Zealand.
Shipping Restrictions
Unable to ship the Jupiter and Jupiter SE 3D printer to post office addresses.
You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.
Shipping Fees:
For orders over $70 AUD, it’s FREE SHIPPING. Orders under $70 AUD will be charged a $20 AUD shipping fee. EXCEPT for the conditions listed below:
- For orders including Jupiter SE, some areas (Northern Territory, Queensland, Tasmania, Western Australia) will be charged shipping fees.
- For orders including Saturn 4 or Saturn 4 Ultra will be charged $30/pc shipping fees.
Ownership, Terms, and Risk
Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.
Note: Please do not enter any PO Box address for orders containing Jupiter SE, otherwise, your package can’t be dispatched by any express.
Normally the orders that have been shipped out (you have received the tracking number or your order status has been completed) cannot be canceled. If you have to refuse delivery due to force majeure after the package is dispatched from ELEGOO, you are subject to the return and refund policies and must pay for the original shipping charges, which will be deducted from your refund.
If you do not contact the delivery company within 5 days after the delivery attempt, they may return the goods to us. A return charge may be assigned to us which may be twice of the delivery cost. If the case of this happens, we reserve the right to ask you to pay the return charge plus an additional re-delivery cost before we re-dispatch the item to you.
When the goods are delivered, please check that the order is complete and undamaged. If there is any damage to the goods at the point of delivery, you can contact us: info@elegoo.com
Following a successful transaction you will be notified when your order has been dispatched with a tracking number provided, if you do not receive a tracking number within 48 hours of completing your purchase, we ask that you first check your email “Junk/Spam” folder and then contact us: info@elegoo.com
Refund Policy & Warranty Info
Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and warranty rules differ according to the models and parts list.
Warranty Policy
1. Warranty timeline
Models | Parts List | Warranty Period | |
3D Printing Related Products | Neptune 3 Neptune 3 Pro/3 Plus/3 Max Neptune 4/4 Pro/4 Plus/4 Max |
PEI Platform Plate, Nozzle, Heater, Thermistor, PTFE Tube, Tools | No warranty |
Hot End | 3 Months | ||
Extruder Kit | 6 Months | ||
Main Parts of the Machine | 12 Months | ||
Jupiter | Release Film, Tools | No warranty | |
LCD Screen | 3 Months | ||
Resin Tank, Build Plate | 6 Months | ||
Other Main Parts of the Machine | 12 Months | ||
Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 DLP/4 Ultra/5/5 Ultra Saturn S/Saturn 2/Saturn 8K/3/3 Ultra/4/4 Ultra Jupiter SE |
Release Film, Tools | No warranty | |
LCD Screen, Resin Tank, Build Plate | 6 Months | ||
Other Main Parts of the Machine (FEP&Tools Excluded) | 12 Months | ||
Mercury Mercury Plus V1.0/V2.0 Mercury X/XS Bundle |
Main Parts of the Machine (Tools Excluded) | 12 Months | |
PHECDA LASER ENGRAVER & CUTTER- 10w/20W |
Main Parts | PCB, Motor, Laser head, Power Adapter | 12 Months |
Other Parts① | Fans | 6 Months | |
Other Parts② | Synchronous belt, motor connection line, laser connection line | 3 Months | |
Consumables and Other attached |
Power cord, USB cable, Engraving Material (filter cartridge, wood board, stainless steel sheet, leather, etc.), user manual, packaging, tools (hexagonal wrench, open-end wrench), etc. | No warranty | |
Arduino Kits, Robot Kits & Component Kits | All | All | 12 Months |
Pre-owned Products | All | All | No warranty |
Accessories (For individual purchases) | Release Film:FEP/PFA/ACF | Release film is a consumable product without warranty | No warranty |
LCD Screen: Mars/Jupiter |
Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. | 3 Months | |
LCD Screen: Mars 2/2 Pro/3/3 Pro/4/4 Ultra/4 Max/Saturn /S/2/8K/3/3 Ultra/4/4 Ultra/Jupiter SE |
Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. | 6 Months | |
Build Plate | Damage caused by scratches, drops or bumps is not covered by the warranty. | 6 Months | |
Resin Tank | Installation tools and screws are not warranted | 6 Months | |
Air Purifier: Mini/USB/Mars Mate |
Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. | 12 Months | |
Mini Heater | Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. | 12 Months | |
Washing Bucket:Mercury Plus V1.0/ V2.0Mercury X/XS Bundle | No warranty for damage caused by man / misuse (e.g. resin curing inside the bucket). | 6 Months | |
3D Stainless Steel Funnel | 3D Stainless Steel Funnel is a consumable product without warranty | No warranty | |
PEI Platform Kit | PEI Platform Kit is a consumable product without warranty | No warranty | |
Nozzle Kit | Nozzle Kit is a consumable product without warranty | No warranty | |
PTFE Tube | PTFE Tube is a consumable product without warranty | No warranty | |
Hotend Kit | Hotend Kit (Nozzle, PTFE Tube Excluded) | 3 Months | |
Extruder Kit | Entire Dual-Gear Direct Extruder Kit | 6 Months | |
Cooling Fan Kit | Including 4010/4015 Blower Fan and 6010 Axial Flow Fan | 12 Months | |
STM 32-bit Silent Motherboard | Motherboard | 12 Months | |
Enclosure | All | 12 Months | |
Filament Vacuum Storage Bags Kit | The pump is guaranteed for 1 month and the vacuum bag is a consumable product without warranty. | 1 Month | |
Rotary Attachment: PHECDA Laser Engraver |
All | 12 Months | |
10W/20W Air Assist:PHECDA Laser Engraver | All | 12 Months | |
Enclosure:PHECDA Laser Engraver | All | 12 Months | |
Honeycomb Panel: PHECDA Laser Engraver |
Honeycomb Panel is a consumable product without warranty | No warranty | |
Raisers:PHECDA Laser Engraver | All | 12 Months | |
Composite Filter:PHECDA Laser Engraver | Composite Filter is a consumable product without warranty | No warranty | |
10W/20W Laser Module:PHECDA Laser Engraver | All | 12 Months | |
Window Mirror:PHECDA Laser Engraver | Window Mirror is a consumable product without warranty | No warranty | |
20W Adapter:PHECDA Laser Engraver | All | 12 Months |
2. Warranty Rules for Laser Head and Tube
A. Laser Head WarrantyRules:
The rate of laser power drop is related to the frequency of use, working hours, and working environment.
B. Laser Tube Warranty Rules:
a). If the laser tube is found to be damaged during the first unpacking inspection, after-sales warranty service can be provided normally;
b). During the warranty period, if the laser tube cannot emit light normally, but no obvious appearance defects are found, after-sales warranty services can be provided normally;
c). During the warranty period, if the laser tube has any appearance cracks (including but not limited to cracks caused by improper handling or cracks caused by freezing temperatures), after-sales warranty services can't be provided normally.
3. Warranty Period
All times shown on this page are calculated from the date the original order was received. If you receive free replacement products or accessories, the warranty period will still be calculated from the date the original order was received.
4. Warranty Forfeiture
The following Conditions Are Not Covered Under Warranty:
A. Products without sufficient proof of purchase
B. Lost or stolen products
C. Items that have expired their warranty period
D. Non-quality-related issues (after 30 days of purchase)
E. Free products
F. Repairs through 3rd parties
G. Damage from outside sources
H. Damage from misuse of products (including, but not limited to: falls, extreme temperatures, water, and operating devices improperly)
I. Purchases from illegitimate resourcesor second-handed parties
J. Normal discoloration, wear, or consumption during product use.
Return & Refund Policy
1. For Unwanted Items
*This clause does not apply to Pre-owned & Refurbished items.
If the Elegoo product that you purchased does not meet your satisfaction but was not confirmed defective by certified Elegoo technicians, we call such product as “unwanted product”.
- For products in condition unopened (all original tags and labels attached), within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 5% restocking fee based on the order amount.
- For products in condition open-box and unused, within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 15% restocking fee based on the order amount.
- For used products or orders beyond 14 days, refunds for unwanted products are not available.
Unwanted Issue |
|||||
|
Product Status |
Items |
Responsibility of Return Shipping Charges |
Restocking Fee |
Deduction Fee |
Refund |
|||||
Within 14 Days |
Unopened |
√ |
Customer |
5% based on the order amount |
If the returned machine detects key parts missing, the corresponding fees will be deducted. |
Open-box and unused |
√ |
Customer |
15% based on the order amount |
||
Used |
× |
× |
× |
||
Within Warranty |
All Status |
× |
× |
× |
× |
For your own benefit, we recommend that you use a traceable carrier that can provide you with the delivery confirmation to ship your Product for refund back to the location instructed in the RMA authorization. Elegoo shall not be responsible for any loss or damage to the returning product caused in transit.
The returning product will be thoroughly inspected by Elegoo when received and a decision will be made whether the inspection criteria are met. If your returning product fails to satisfy the inspection criteria and has been shipped to Elegoo, your non-conforming product for refund will be rejected or subject to a deduction fee at Elegoo’s sole discretion.
After the 14-day refund window has expired, your only recourse regarding the products is through our warranty.
2. For Quality-Related Items
*This clause does not apply to Pre-owned & Refurbished items.
A. Product is defective when you receive it, within 14days of delivery, you can return defective items to Elegoo and get a full refund or replacement, and Elegoo is responsible for return shipping charges. Or you can ask Elegoo to repair defective items, and Elegoo is responsible for repair fees.
B. Beyond the 14days but within warranty, a full refund and replacement are not available, but repair is acceptable. Elegoo is responsible for repair fees.
C. Out of warranty, Elegoo will provide free technical support, if the parts need to be replaced, the customer is responsible for the repair fees, which means the customer needs to purchase the parts and bear the freight.
Quality-Related Issue |
|||||
|
Items |
Responsibility of Fees |
|||
Refund |
Replace |
Repair |
Return Shipping Charges |
Repair Fees |
|
Within 14 Days |
√ |
√ |
√ |
Elegoo |
Elegoo |
Within Warranty |
× |
× |
√ |
× |
Elegoo |
Out of Warranty |
× |
× |
√ |
× |
Customer |
Important: To avoid any delay or denial of processing your refund and replacement request, please verify that the returning product must be with all parts & accessories included and all original tags and labels attached and in the original box (generic boxes will be rejected).
3. Process After Returning Product
After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least 7 days from the receipt of your item to process your return. We will notify you by email when your return has been processed and move to the next warranty process, refund you the payment via Paypal, or send a new replacement to you.
Contact Us
Regarding product issues, please don't hesitate to contact us at the customer service channels below to acquire technical support, refund or exchange.
- For 3D printer technical support: 3dp@elegoo.com
- For laser engraver technical support: lec@elegoo.com
- For order issues, unwanted item refunds, or returns: info@elegoo.com
- For STEM kits, robots technical support: service@elegoo.com
When contacting our customer service team, the buyer must provide sufficient proof of purchase (the order number from online purchases made through ELEGOO, Amazon, or other ELEGOO's authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.
![](http://au.elegoo.com/cdn/shop/files/M5-1-1_Automatic_Leveling.jpg?v=1718786927)
Automatic Leveling
Automatic Leveling
![](http://au.elegoo.com/cdn/shop/files/M5-1-2_Smart_Mechanical_Sensor.jpg?v=1718787020)
Smart Mechanical Sensor
Smart Mechanical Sensor
![](http://au.elegoo.com/cdn/shop/files/M5-1-1_Automatic_Leveling.jpg?v=1718786927)
Automatic Leveling
Automatic Leveling
![](http://au.elegoo.com/cdn/shop/files/M5-1-3_One-Click_Self-Check.jpg?v=1718787067)
One-Click Self-Check
One-Click Self-Check
![](http://au.elegoo.com/cdn/shop/files/M5-1-5_6.6-Inch_4K_Mono_LCD.jpg?v=1718787146)
6.6-Inch 4K Mono LCD
6.6-Inch 4K Mono LCD
![](http://au.elegoo.com/cdn/shop/files/M5-1-6_COB_Light_Source.jpg?v=1718787183)
COB Light Source
COB Light Source
![](http://au.elegoo.com/cdn/shop/files/M5-1-2_Smart_Mechanical_Sensor.jpg?v=1718787020)
Smart Mechanical Sensor
Smart Mechanical Sensor
![](http://au.elegoo.com/cdn/shop/files/M5-1-4_Advanced_Overheat_Protection_1.jpg?v=1719399747)
Advanced Overheat
Protection
Advanced Overheat
Protection
Effortless Magic with One-Click Automatic Leveling
Effortless precision is just a click away. The Mars 5 offers advanced automatic leveling function with a simple click, allowing all skill levels to dive straight into the creative process. Say goodbye to tedious calibrations - simply unbox, power on, and print.
![](http://au.elegoo.com/cdn/shop/files/M5-2-1_One-Click_Automatic_Leveling_20x20_crop_center.jpg?v=1718787253)
Print Smarter , Print Worry-Free
With a smart mechanical sensor, the Mars 5 supports residue detection to prevent damage to the LCD screen. Plus, timely alarms for resin shortages and leveling failures minimize waste and ensure uninterrupted efficiency. Stay worry-free and enjoy high-quality prints every time.
![](http://au.elegoo.com/cdn/shop/files/M5-2-2_Print_Smarter_20x20_crop_center.jpg?v=1718787254)
One-Click Self-Check , Ensuring Reliable Prints
Tired of setup hassles and unexpected errors ruining your printing projects? With just a simple click, the Mars 5 performs a quick self-check and verifies the optimal functionality of its components before each print. Say goodbye to wasted time and materials due to faulty components.
![](http://au.elegoo.com/cdn/shop/files/M5-2-3_One-Click_Self-Check_20x20_crop_center.jpg?v=1718787254)
4K Mono LCD for Stunning Details
Featuring a 4K mono LCD with advanced COB light source, the Mars 5 faithfully reproduces intricate details with stunning fidelity and textures, bringing your ideas to life with flawless precision.
![](http://au.elegoo.com/cdn/shop/files/M5-2-4_4K_Mono_LCD_20x20_crop_center.jpg?v=1718787253)
Advanced Overheat Protection , Cool and Safe
No more overheating worries. The advanced overheat protection automatically halts printing and triggers an alarm if the LED temperature exceeds 80℃. Enhanced by an efficient cooling system, the printer ensures safety, extended lifespan, and optimal performance.
![](http://au.elegoo.com/cdn/shop/files/M5-2-5_Advanced_Overheat_Protection_1_20x20_crop_center.jpg?v=1719399790)
![](http://au.elegoo.com/cdn/shop/files/M5-3-1-1_Quick-Release_Design_20x_crop_center.jpg?v=1718787422)
The quick-release design of the build plate enables effortless removal and installation, making cleaning and maintenance a breeze.
![](http://au.elegoo.com/cdn/shop/files/M5-3-1-4_Adjustable_Foot_Pads_20x_crop_center.jpg?v=1718787422)
No more resin clogs hindering your creative flow with the replaceable resin tank lock screws. Enjoy uninterrupted printing perfection every time.
![](http://au.elegoo.com/cdn/shop/files/M5-3-1-3_Dual_Pour_Spouts_Resin_Tank_20x_crop_center.jpg?v=1718787423)
Double the convenience, double the speed. The resin tank features dual pour spouts, allowing for quick and easy loading and unloading, maximizing your efficiency.
![](http://au.elegoo.com/cdn/shop/files/M5-3-1-4_Adjustable_Foot_Pads_20x_crop_center.jpg?v=1718787422)
Adapt effortlessly to different surfaces and enjoy a seamless printing experience with the versatile and adjustable foot pads.
![](http://au.elegoo.com/cdn/shop/files/M5-3-2-1_Durable_Design_20x_crop_center.jpg?v=1718787477)
Trust the Mars 5's robust metal frame to withstand the test of time. With meticulous engineering, it is designed to endure countless printing hours while maintaining exceptional print quality and reliability.
![](http://au.elegoo.com/cdn/shop/files/M5-3-2-2_Laser-Engraved_Build_Plate_20x_crop_center.jpg?v=1718787477)
Laser-engraved build plate features superior adhesion, preventing detachment and warping issues during printing, and ensuring effortless and damage-free removal of printed models.
![](http://au.elegoo.com/cdn/shop/files/M5-3-2-3_FEP_Release_Film_20x_crop_center.jpg?v=1718787477)
With a non-stick and smooth surface, the release film offers superior release performance, ensuring effortless peeling of cured layers and eliminating incomplete detachment.
![](http://au.elegoo.com/cdn/shop/files/M5-3-2-4_Compatible_With_Mars_Mate_20x_crop_center.jpg?v=1718787477)
The Elegoo Mars Mate air purifier's built-in high-density activated carbon filter can effectively absorb resin odor, with the purification efficiency up to 95% for TVOC.
What's In Box
![](http://au.elegoo.com/cdn/shop/files/Mars_5-What_s_in_box-1.png?v=1718788273)
Mars 5 3D Printer
![](http://au.elegoo.com/cdn/shop/files/Mars_5-What_s_in_box-3-Resin_Tank.png?v=1718788330)
Resin Tank
![](http://au.elegoo.com/cdn/shop/files/Mars_5-What_s_in_box-2-Build_Plate.png?v=1718788297)
![](http://au.elegoo.com/cdn/shop/files/12_77860dcd-9507-4dfd-a70e-cbce8bf046b7.png?v=1709879985)
U Disk
![](http://au.elegoo.com/cdn/shop/files/Saturn_4_Ultra-_What_s_in_box_8.png?v=1712737506)
Mask
![](http://au.elegoo.com/cdn/shop/files/Saturn_4_Ultra-_What_s_in_box_9.png?v=1712737535)
Gloves
![](http://au.elegoo.com/cdn/shop/files/10_3bb8fa44-1594-46c0-a16a-4bc88ef12d04.png?v=1709879985)
![](http://au.elegoo.com/cdn/shop/files/14_cf934310-a156-4cd6-99e6-83f01bac2db8.png?v=1709879985)
Backup Screws
![](http://au.elegoo.com/cdn/shop/files/16_0e19a3e7-28e5-4ffe-afd5-8af5d6cc1f19.png?v=1709879986)
User Manual
![](http://au.elegoo.com/cdn/shop/files/13_594cef1d-4be2-45ed-b769-f007bbe32f18.png?v=1709879986)
Adapter
![](http://au.elegoo.com/cdn/shop/files/15_a9be978f-7cf7-41b7-82a9-1e948a2e7009.png?v=1709879986)
Tool Kit
![](http://au.elegoo.com/cdn/shop/files/11_309ddfe5-7d04-4b00-b161-60888e3959be.png?v=1709879986)
Scraper
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
![](http://au.elegoo.com/cdn/shop/files/nav_icon_a9f0f2cf-8fe4-4852-8880-c404ad382d7c_20x20_crop_center.png?v=1709880034)
Specification
BUILD VOLUME
143.43 x 89.6 x 150 mm³
PRINTING SPEED
MAX 70mm/h
LAYER THICKNESS
0.01-0.2mm
XY RESOLUTION
35x35μm (4098x2560)
Z-AXIS ACCURACY
0.02mm
PRINTING TECHNOLOGY
MSLA
LIGHT SOURCE
COB Light Source (wavelength 405nm)
LCD SCREEN SIZE
6.6-inch 4K Mono LCD
LCD SCREEN PROTECTOR
PET scratch-resistant film
CONNECTION METHOD
USB Interface
SYSTEM
EL3D-3.0.1
SLICING SOFTWARE
Chitubox & Voxeldance Tango
OPERATING SCREEN
3.5-inch Resistive Touch Screen
LANGUAGE
Chinese, English
AIR PURIFIER
USB connection unavailable, compatible with Mars Mate air purifier
RESIN
Supports most resins on the market (water-washable, standard, ABS-like, plant-based, etc.)
POWER REQUIREMENTS
100-240V 50/60Hz 24V 3A
Other Functions
One-Click Automatic Leveling,
Self-Check & Overheat Protection,
Smart Mechanical Sensor (Resin Shortage Alarm, Residue Detection Alarm, Leveling Failure Alarm).
HEAT DISSIPATION METHOD
3 copper heat pipes + single fan
DIMENSIONS
230 x 230 x 433.5 mm³
Net Weight
6.6kg
Gross Weight
8.6kg
FAQs
How long does delivery take after shipping?
1. In-stock Product: 3-7 workdays for delivery
2. Pre-owned Product: 4-8 workdays for delivery
3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.
What countries do you ship to?
Click to view available countries
Do you offer free shipping service?
Click to view Shipping Fees
Can I change the delivery address of my package after it has been shipped out?
Unfortunately, we cannot change the shipment once the product is shipped.