Mercury XS Bundle

$377.99 AUD $301.99 AUD
Shipping calculated at checkout.

  • 360° all-round exposure
  • Dual function of washing and curing
  • Large washing volume of 7000ml
  • Easy and intuitive operation
  • UV Protection Cover
  • Wide Compatibility
  • Free Shipping
  • 1-Year Warranty
  • 14 Days Return
  • Lifetime Support
Product information

Where We Ship

Orders placed on the ELEGOO AU website can be shipped to Australia.

The estimated delivery time for in-stock products is 3-7 workdays.

If you pre-order a product, it will be shipped according to the estimated delivery time mentioned on the product page, and after shipment, it takes 3-7 workdays for delivery.

*Please note that the ELEGOO AU website does not currently ship to New Zealand.

 

Shipping Restrictions

Unable to ship the Jupiter and Jupiter SE 3D printer to post office addresses.

You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.

 

Shipping Fees:

For orders over $70 AUD, it’s FREE SHIPPING. Orders under $70 AUD will be charged a $20 AUD shipping fee. EXCEPT for the conditions listed below:

  • For orders including Jupiter SE, some areas (Northern Territory, Queensland, Tasmania, Western Australia) will be charged shipping fees.
  • For orders including Saturn 4 or Saturn 4 Ultra will be charged $30/pc shipping fees.

    Ownership, Terms, and Risk

    Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.

    Note: Please do not enter any PO Box address for orders containing Jupiter SE, otherwise, your package can’t be dispatched by any express.

    Normally the orders that have been shipped out (you have received the tracking number or your order status has been completed) cannot be canceled. If you have to refuse delivery due to force majeure after the package is dispatched from ELEGOO, you are subject to the return and refund policies and must pay for the original shipping charges, which will be deducted from your refund.

    If you do not contact the delivery company within 5 days after the delivery attempt, they may return the goods to us. A return charge may be assigned to us which may be twice of the delivery cost. If the case of this happens, we reserve the right to ask you to pay the return charge plus an additional re-delivery cost before we re-dispatch the item to you.

    When the goods are delivered, please check that the order is complete and undamaged. If there is any damage to the goods at the point of delivery, you can contact us: info@elegoo.com

    Following a successful transaction you will be notified when your order has been dispatched with a tracking number provided, if you do not receive a tracking number within 48 hours of completing your purchase, we ask that you first check your email “Junk/Spam” folder and then contact us: info@elegoo.com

    Refund Policy & Warranty Info

    Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and warranty rules differ according to the models and parts list.

     

    Warranty Policy

    1. Warranty timeline

    Models Parts List Warranty Period
    3D Printing Related Products Neptune 3

    Neptune 3 Pro/3 Plus/3 Max

    Neptune 4/4 Pro/4 Plus/4 Max

    OrangeStorm Giga
    PEI Platform Plate, Nozzle, Heater, Thermistor, PTFE Tube, Tools No warranty
    Hot End 3 Months
    Extruder Kit 6 Months
    Main Parts of the Machine 12 Months
    Jupiter Release Film, Tools No warranty
    LCD Screen 3 Months
    Resin Tank, Build Plate 6 Months
    Other Main Parts of the Machine 12 Months
    Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 DLP/4 Ultra/5/5 Ultra

    Saturn S/Saturn 2/Saturn 8K/3/3 Ultra/4/4 Ultra

    Jupiter SE
    Release Film, Tools No warranty
    LCD Screen, Resin Tank, Build Plate 6 Months
    Other Main Parts of the Machine (FEP&Tools Excluded) 12 Months
    Mercury
    Mercury Plus V1.0/V2.0/V3.0
    Mercury X/XS Bundle
    Main Parts of the Machine (Tools Excluded) 12 Months
    PHECDA LASER
    ENGRAVER &
    CUTTER-
    10w/20W
    Main Parts PCB, Motor, Laser head, Power Adapter 12 Months
    Other Parts① Fans 6 Months
    Other Parts② Synchronous belt, motor connection line, laser connection line 3 Months
    Consumables and
    Other attached
    Power cord, USB cable, Engraving Material (filter cartridge, wood board, stainless steel sheet, leather, etc.), user manual, packaging, tools (hexagonal wrench, open-end wrench), etc. No warranty
    Arduino Kits, Robot Kits & Component Kits All All 12 Months
    Pre-owned Products All All No warranty
    Accessories (For individual purchases) Release Film:FEP/PFA/ACF Release film is a consumable product without warranty No warranty
    LCD Screen:
    Mars/Jupiter
    Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. 3 Months
    LCD Screen:
    Mars 2/2 Pro/3/3 Pro/4/4 Ultra/4 Max/5/5 Ultra
    Saturn /S/2/8K/3/3 Ultra/4/4 Ultra
    Jupiter SE
    Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. 6 Months
    Build Plate Damage caused by scratches, drops or bumps is not covered by the warranty. 6 Months
    Resin Tank Installation tools and screws are not warranted 6 Months
    Air Purifier:
    Mini/USB/Mars Mate
    Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. 12 Months
    Mini Heater Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. 12 Months
    Washing Bucket:Mercury Plus V1.0/ V2.0Mercury X/XS Bundle No warranty for damage caused by man / misuse (e.g. resin curing inside the bucket). 6 Months
    3D Stainless Steel Funnel 3D Stainless Steel Funnel is a consumable product without warranty No warranty
    PEI Platform Kit/PEI Magnetic Platform Kit PEI Platform Kit is a consumable product without warranty No warranty
    Nozzle Kit Nozzle Kit is a consumable product without warranty No warranty
    PTFE Tube PTFE Tube is a consumable product without warranty No warranty
    Hotend Kit Hotend Kit (Nozzle, PTFE Tube Excluded) 3 Months
    Extruder Kit/Printhead Kit Entire Dual-Gear Direct Extruder Kit 6 Months
    Cooling Fan Kit Including 4010/4015 Blower Fan and 6010 Axial Flow Fan 12 Months
    STM 32-bit Silent Motherboard Motherboard 12 Months
    Enclosure All 12 Months
    Dual Printhead Mounting Plate All 12 Months
    Four-Printhead Mounting Plate All 12 Months
    5KG Large Spool Holder Kit All 12 Months
    Camera All 12 Months
    Filament Vacuum Storage Bags Kit The pump is guaranteed for 1 month and the vacuum bag is a consumable product without warranty. 1 Month
    Rotary Attachment:
    PHECDA Laser Engraver
    All 12 Months
    10W/20W Air Assist:PHECDA Laser Engraver All 12 Months
    Enclosure:PHECDA Laser Engraver All 12 Months
    Honeycomb Panel:
    PHECDA Laser Engraver
    Honeycomb Panel is a consumable product without warranty No warranty
    Raisers:PHECDA Laser Engraver All 12 Months
    Composite Filter:PHECDA Laser Engraver Composite Filter is a consumable product without warranty No warranty
    10W/20W Laser Module:PHECDA Laser Engraver All 12 Months
    Window Mirror:PHECDA Laser Engraver Window Mirror is a consumable product without warranty No warranty
    20W Adapter:PHECDA Laser Engraver All 12 Months
    Metal Business Cards All No warranty
    Silicone Mat All No warranty

    2. Warranty Rules for Laser Head and Tube

    A. Laser Head WarrantyRules:
      The rate of laser power drop is related to the frequency of use, working hours, and working environment.

    B. 
    Laser Tube Warranty Rules:

    a). If the laser tube is found to be damaged during the first unpacking inspection, after-sales warranty service can be provided normally;

    b). During the warranty period, if the laser tube cannot emit light normally, but no obvious appearance defects are found, after-sales warranty services can be provided normally;

    c). During the warranty period, if the laser tube has any appearance cracks (including but not limited to cracks caused by improper handling or cracks caused by freezing temperatures), after-sales warranty services can't be provided normally.

    3. Warranty Period

    All times shown on this page are calculated from the date the original order was received. If you receive free replacement products or accessories, the warranty period will still be calculated from the date the original order was received.

     

    4. Warranty Forfeiture

    The following Conditions Are Not Covered Under Warranty:
    A. Products without sufficient proof of purchase
    B. Lost or stolen products
    C. Items that have expired their warranty period
    D. Non-quality-related issues (after 30 days of purchase)
    E. Free products
    F. Repairs through 3rd parties
    G. Damage from outside sources
    H. Damage from misuse of products (including, but not limited to: falls, extreme temperatures, water, and operating devices improperly)
    I. Purchases from illegitimate resourcesor second-handed parties
    J. Normal discoloration, wear, or consumption during product use.

     

    Return & Refund Policy

    1. For Unwanted Items

    *This clause does not apply to Pre-owned & Refurbished items.

    If the Elegoo product that you purchased does not meet your satisfaction but was not confirmed defective by certified Elegoo technicians, we call such product as “unwanted product”.

     

    1. For products in condition unopened (all original tags and labels attached), within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 5% restocking fee based on the order amount.
    2. For products in condition open-box and unused, within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 15% restocking fee based on the order amount.
    3. For used products or orders beyond 14 days, refunds for unwanted products are not available.

     

    Unwanted Issue

     

    Product Status

    Items

    Responsibility of Return Shipping Charges

    Restocking Fee

    Deduction Fee

    Refund

    Within 14 Days

    Unopened

    Customer

    5% based on the order amount

    If the returned machine detects key parts missing, the corresponding fees will be deducted.

    Open-box and unused

    Customer

    15% based on the order amount

    Used

    ×

    ×

    ×

    Within Warranty

    All Status

    ×

    ×

    ×

    ×

     Important: After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.

    For your own benefit, we recommend that you use a traceable carrier that can provide you with the delivery confirmation to ship your Product for refund back to the location instructed in the RMA authorization. Elegoo shall not be responsible for any loss or damage to the returning product caused in transit.

     

    The returning product will be thoroughly inspected by Elegoo when received and a decision will be made whether the inspection criteria are met. If your returning product fails to satisfy the inspection criteria and has been shipped to Elegoo, your non-conforming product for refund will be rejected or subject to a deduction fee at Elegoo’s sole discretion.

     

    After the 14-day refund window has expired, your only recourse regarding the products is through our warranty.


     

    2. For Quality-Related Items
    *This clause does not apply to Pre-owned & Refurbished items.

     A. Product is defective when you receive it, within 14days of delivery, you can return defective items to Elegoo and get a full refund or replacement, and Elegoo is responsible for return shipping charges. Or you can ask Elegoo to repair defective items, and Elegoo is responsible for repair fees.

    B. Beyond the 14days but within warranty, a full refund and replacement are not available, but repair is acceptable. Elegoo is responsible for repair fees.

    C. Out of warranty, Elegoo will provide free technical support, if the parts need to be replaced, the customer is responsible for the repair fees, which means the customer needs to purchase the parts and bear the freight.

    Quality-Related Issue

     

    Items

    Responsibility of Fees

    Refund

    Replace

    Repair

    Return Shipping Charges

    Repair Fees

    Within 14 Days

    Elegoo

    Elegoo

    Within Warranty

    ×

    ×

    ×

    Elegoo

    Out of Warranty

    ×

    ×

    ×

    Customer

    Important: 1. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.

    2. To avoid any delay or denial of processing your refund and replacement request, please verify that the returning product must be with all parts & accessories included and all original tags and labels attached and in the original box (generic boxes will be rejected).

    3. Process After Returning Product

    After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least 7 days from the receipt of your item to process your return. We will notify you by email when your return has been processed and move to the next warranty process, refund you the payment via Paypal, or send a new replacement to you.

     

    Contact Us

    Regarding product issues, please don't hesitate to contact us at the customer service channels below to acquire technical support, refund or exchange.

    1. For 3D printer technical support: 3dp@elegoo.com
    2. For laser engraver technical support: lec@elegoo.com
    3. For order issues, unwanted item refunds, or returns: info@elegoo.com
    4. For STEM kits, robots technical support: service@elegoo.com

    When contacting our customer service team, the buyer must provide sufficient proof of purchase (the order number from online purchases made through ELEGOO, Amazon, or other ELEGOO's authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.

    Dual function of washing and curing

    ELEGOO Mercury XS contains 1 washing station and 1 post-curing station, with the dual function of cleaning and curing to remove uncured resin of 3D printed models and optimized your print quality, making your post-processing simple and efficient.

    360° all-round exposure

    2 adjustable L-shaped light bars and increased 4 LED lights under the 360° rotating turntable paired with Fresnel lens to emit UV light with a uniform wavelength of 405nm, ensuring that the model is evenly exposed from all angles.

    A handheld UV lamp

    Additionally, there is a handheld UV lamp to cure the interior or nooks and crannies of 3D printed parts for smoother surface and incredible print quality, also ideal for curing assembled models.

    Large washing volume

    With an 7000ml large capacity sealed water tank, you can directly wash large models printed or clean parts in batches, which offers substantial time savings and improves your productivity.

    Friendly Tips: Kindly be aware that for the Saturn 4 series and Jupiter series, the build platform must be removed for cleaning, which is different from other applicable models. For other models, please refer to the MAXIMUM WASH VOLUME in the specification section and assess whether the platform needs to be removed for cleaning based on the model's height.

    UV Protection Cover

    The transparent cover of the curing machine can block up to 99.9% of ultraviolet rays to improve resin solidification rate and protect your eyesight during curing process. A safety option automatically switches off the UV lights when you remove the cover.

    Convenient Operation Settings

    Simply press and hold the knob for 3 seconds to turn on, with a neatly interface for easily operating the washing and curing functions. The settings time can be adjusted for maximum 30 minutes according to your needs.

     

    Operation Instructions

    1.

    After the model is printed, please clean and blow-dry the model before putting it into the machine.

    2.

    If the model become yellow after curing, please reduce the curing time. Over curing will lead to a yellowish model.

    3.

    Recommended ambient temperature is 0-40 degrees, and the ambient humidity temperature is 20%-50%.

    4.

    Please do not use it for more than 40 minutes at a time to avoid overheating

    5.

    Cure Time: If model diameter less than 30 mm, the curing time is recommended to be 2 minutes. If the surface structure of the model is complex, it is recommended to increase the curing time properly.

    6.

    Special Notes: The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.

    Specification

    Mercury XS WASH Machine
    Control Method

    Knob + Button

    Rated Power

    12W

    Input Voltage

    110V/240V 50/60Hz

    Time Setting

    0-30mins

    Machine Size

    255mm*155mm*385.5mm

    Maximum Wash Volume

    (with platform)180mm*121mm*153mm
    (without platform)201mm*124mm*255mm

    Machine Net Weight

    2.27kg

    Mercury XS CURE Machine
    Control Method

    Knob + Button

    Rated Power

    36W

    Input Voltage

    110V/240V 50/60Hz

    Time Setting

    0-30mins

    Machine Size

    246mm*230mm*363.5mm

    Maximum Curing Size

    200mm*260mm

    Machine Net Weight

    2.4kg

    View all(6+)

    FAQs

    Can I use this wash & cure machine with all Elegoo resin printers?

    Yes, the machine is compatible with all Elegoo models. However, please note the following:

    *For the Saturn 4 series and Jupiter series, you will need to remove the build platform for cleaning, which is different from other compatible models.

    *For other models, to determine if you need to remove the platform for cleaning, please refer to the “MAXIMUM WASH VOLUME’ in the specification section and assess it based on the model's height.

    How long does delivery take after shipping?

    1. In-stock Product: 3-7 workdays for delivery

    2. Pre-owned Product: 4-8 workdays for delivery

    3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.

    What countries do you ship to?

    Click to view available countries

    Do you offer free shipping service?

    Click to view Shipping Fees

    Can I change the delivery address of my package after it has been shipped out?

    Unfortunately, we cannot change the shipment once the product is shipped.